Step 1: False (Faux) Panel Removal
Each cabinet company or maker installs false panels dierently. False panels are
often stapled, glued, screwed, snapped, or secured using support panels to secure
them to the frame. A licensed contractor should determine how your false panel is
secured to the frame to then remove it carefully.
* If staples or nails are clipped, use a nail punch to push the edge into the wood. You
can then use ller to create a smooth surface. Ensure the environment is void of
anything sharp that can catch on skin or clothes.
Make sure you have a solid and secure surface to install the mount brackets. If you
are installing on drywall or 1/4” wood, we recommend you add wood support
beams either vertically or horizontally to prevent any movement.
Each bracket should be screwed to the wall or support beam using 3 screws suited
for the type of surface it will mount to (screws not included).
Step 2: Support Beam(s) Addition (since one or two may be used)
a. Add Brackets to the Appliance Panel
b. Slide Appliance Panel in Wall Brackets
c. Secure Appliance Panel
d. Add Tubes and Caps
The VVS system provides two panel brackets for mounting. Place each panel
bracket on the appliance panel using the second row of the brass insert holes.
The arm portion of the bracket should point away from the false panel. If
completed correctly, the appliance panel will set at a 45 degree angle on a
level-mounted panel bracket.
Slide the appliance panel and its brackets into the mount brackets. The top of the panel
should set below the base of the sink, against the pipe. Remember, the panel must be far
enough inside the cabinet to allow all handles to sit within the cabinet walls.
To secure the appliance panel, insert the wing screws with washers into the adjustment
groove of the panel bracket and secure with the screw nut provided. Tightening the wing
screws into the xed screw nuts will secure th appliance panel to the mounted panel
bracket.
Once the panel is constructed, place each ventilated tube into the corresponding hold
in the appliance panel. Then attach each ofthe 2” and 1.5“ caps security with a push
and a twist.
MAKE SURE ALL 2” AND1.5” TUBES ARE CAPPED.
Step 3: Appliance Panel Assembly
(1 paginas)
(4 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales